Having trouble?

Please purchase on Angels Horn official website, or contact us.

Angels Horn turntables come with a cartridge and stylus already installed on the tonearm at the factory.

Please refer to our quick installation manual and product manual for setup. In the meantime, you can refer to Angels Horn’s installation video on Youtube.

Since our record player has a built-in amplifier, and it has two working modes (PHONO OUT/ LINE OUT), the additional equipment that needs to be purchased is different in these two cases:
The RCA Jacks of this unit are shared as both the Phono output jacks and the Line output jacks. They are determined by the Phono/Line Switch.
1. When used as a Line Output, the jacks output analog line-level signals and could be connected directly with a pair of active speakers or the appropriate input of your stereo system. In this case, you only need to buy a pair of active speakers.
2. When used as a Phono Output, they should be connected to the phono pre-amp or the phono input of the stereo system. In this case, you need to buy a set of stereo system.

Use the ground wire to connect your record player to your speakers, or use the ground wire to connect your record player to your stereo system.

Unlock the tonearm, set the lift lever to the up position, then position the cartridge in the space between the tonearm rest and platter.
Set the tonearm lift lever to the down position.
Inset the counterweight onto the rear of the tonearm.
Rotate the counterweight to make the tonearm balanced.
Set the tonearm lift lever to the up position. Return the tonearm to its rest and lock it.
Keep the counterweight still, just rotate the dial until “0” is at the top.
Rotate the counterweight 1 and 3/4ths times for the recommended 3.5 grams.
In the meantime, you can refer to Angels Horn’s installation video on Youtube.

Tie the anti-skating weight’s fishing line to the 3rd groove of the small stick above the tonearm. Then hang the weight from the standing hook.

The plastic key part is a belt hook, and it is used to adjust the height of the belt.
How to use it: install the belt on the middle shaft of the turntable and the motor shaft, hold the plastic key on the inside of the belt, and then turn the plastic key along the inside of the belt, so that the belt can be placed on the height of the middle shaft of the turntable and the motor shaft Adjust the height to the same level.

Check the order status in the “Tracking Order” section according to the order number. You can also check the order status directly at https://www.17track.net/

Check through the record of payment platform
Check by email

The ordering process is simply 3 quick steps:
Select your favorite items and add them to cart
Enter your billing and shipping information

Immediately contact us by phone or email and our team will gladly resolve all of your concerns!
Email: support@angelshorn.com

Following a successful order, please expect a confirmation email. You will also receive an update email when your order goes into production. Once your order ships, we will send a third email with your tracking information.
The most recent information on your order is always available via the receipt link provided in our email correspondence.
If you did not receive the status update emails, please check your spam folder or promotions tab in case it was redirected there.

It depends on your location and selected shipping options. At the time of purchase, we will provide you with an estimated delivery date. Most orders are shipped 1-3 days after we receive it. Delivered within 3-7 days.

Shenzhen Guokeying Technology Co., Ltd.


Room 715, Building 8, 1970 Science Park, Minzhi Community, Minzhi Street, Longhua District, Shenzhen, Guangdong, China



سایت شرط بندی معتبر ایرانی

سایت های پیش بینی ایرانی

شرط کده


بهترین سایت های پیش بینی

شرط برو

جسوس بت

سایت های پوکر آنلاین

ایران بت

انجمن پیش بینی ایران





sekabet giriş








betting sites of tanzania






مل بت


Close My Cart
Close Wishlist
Recently Viewed Close